Understanding the Reducibility of CeO2 Surfaces by Proton-Electron Transfer from CpCr(CO)3H.

CeO2 is a popular material in heterogeneous catalysis, molecular sensors, and electronics and owes many of its special properties to the redox activity of Ce, present as both Ce3+ and Ce4+. However, the reduction of CeO2 with H2 (thought to occur through proton-electron transfer (PET) giving Ce3+ and new OH bonds) is poorly understood due to the high reduction temperatures necessary and the ill-defined nature of the hydrogen atom sources typically used. We have previously shown that transition-metal hydrides with weak M-H bonds react with reducible metal oxides at room temperature by PET. Here, we show that CpCr(CO)3H (1) transfers protons and electrons to CeO2 due to its weak Cr-H bond. We can titrate CeO2 with 1 and measure not only the number of surface Ce3+ sites formed (in agreement with X-ray absorption spectroscopy) but also the lower limit of the hydrogen atom adsorption free energy (HAFE). The results match the extent of reduction achieved from H2 treatment and hydrogen spillover on CeO2 in a wide range of applications.

In Situ X-ray Absorption Spectroscopy of LaFeO3 and LaFeO3/LaNiO3 Thin Films in the Electrocatalytic Oxygen Evolution Reaction.

We study the electrocatalytic oxygen evolution reaction using in situ X-ray absorption spectroscopy (XAS) to track the dynamics of the valence state and the covalence of the metal ions of LaFeO3 and LaFeO3/LaNiO3 thin films. The active materials are 8 unit cells grown epitaxially on 100 nm conductive La0.67Sr0.33MnO3 layers using pulsed laser deposition (PLD). The perovskite layers are supported on monolayer Ca2Nb3O10 nanosheet-buffered 100 nm SiNx membranes. The in situ Fe and Ni K-edges XAS spectra were measured from the backside of the SiNx membrane using fluorescence yield detection under electrocatalytic reaction conditions. The XAS spectra show significant spectral changes, which indicate that (1) the metal (co)valencies increase, and (2) the number of 3d electrons remains constant with applied potential. We find that the whole 8 unit cells react to the potential changes, including the buried LaNiO3 film.

Unravelling the amorphous structure and crystallization mechanism of GeTe phase change memory materials.

The reversible phase transitions in phase-change memory devices can switch on the order of nanoseconds, suggesting a close structural resemblance between the amorphous and crystalline phases. Despite this, the link between crystalline and amorphous tellurides is not fully understood nor quantified. Here we use in-situ high-temperature x-ray absorption spectroscopy (XAS) and theoretical calculations to quantify the amorphous structure of bulk and nanoscale GeTe. Based on XAS experiments, we develop a theoretical model of the amorphous GeTe structure, consisting of a disordered fcc-type Te sublattice and randomly arranged chains of Ge atoms in a tetrahedral coordination. Strikingly, our intuitive and scalable model provides an accurate description of the structural dynamics in phase-change memory materials, observed experimentally. Specifically, we present a detailed crystallization mechanism through the formation of an intermediate, partially stable 'ideal glass' state and demonstrate differences between bulk and nanoscale GeTe leading to size-dependent crystallization temperature.

Active Sites in Cr(III)-Based Ethylene Polymerization Catalysts from Machine-Learning-Supported XAS and EPR Spectroscopy.

The ethylene polymerization Phillips catalyst has been employed for decades and is central to the polymer industry. While Cr(III) alkyl species are proposed to be the propagating sites, there is so far no direct experimental evidence for such proposal. In this work, by coupling Surface organometallic chemistry, EPR spectroscopy, and machine learning-supported XAS studies, we have studied the electronic structure of well-defined silica-supported Cr(III) alkyls and identified the presence of several surface species in high and low-spin states, associated with different coordination environments. Notably, low-spin Cr(III) sites are shown to participate in ethylene polymerization, indicating that similar Cr(III) alkyl species could be involved in the related Phillips catalyst.

Combining Atomic Layer Deposition with Surface Organometallic Chemistry to Enhance Atomic-Scale Interactions and Improve the Activity and Selectivity of Cu-Zn/SiO2 Catalysts for the Hydrogenation of CO2 to Methanol.

The direct synthesis of methanol via the hydrogenation of CO2, if performed efficiently and selectively, is potentially a powerful technology for CO2 mitigation. Here, we develop an active and selective Cu-Zn/SiO2 catalyst for the hydrogenation of CO2 by introducing copper and zinc onto dehydroxylated silica via surface organometallic chemistry and atomic layer deposition, respectively. At 230 °C and 25 bar, the optimized catalyst shows an intrinsic methanol formation rate of 4.3 g h-1 gCu-1 and selectivity to methanol of 83%, with a space-time yield of 0.073 g h-1 gcat-1 at a contact time of 0.06 s g mL-1. X-ray absorption spectroscopy at the Cu and Zn K-edges and X-ray photoelectron spectroscopy studies reveal that the CuZn alloy displays reactive metal support interactions; that is, it is stable under H2 atmosphere and unstable under conditions of CO2 hydrogenation, indicating that the dealloyed structure contains the sites promoting methanol synthesis. While solid-state nuclear magnetic resonance studies identify methoxy species as the main stable surface adsorbate, transient operando diffuse reflectance infrared Fourier transform spectroscopy indicates that µ-HCOO*(ZnOx) species that form on the Cu-Zn/SiO2 catalyst are hydrogenated to methanol faster than the µ-HCOO*(Cu) species that are found in the Zn-free Cu/SiO2 catalyst, supporting the role of Zn in providing a higher activity in the Cu-Zn system.

Surface Redox Dynamics in Gold-Zinc CO2 Hydrogenation Catalysts.

Au-Zn catalysts have previously been shown to promote the hydrogenation of CO2 to methanol, but their active state is poorly understood. Here, silica-supported bimetallic Au-Zn alloys, prepared by surface organometallic chemistry (SOMC), are shown to be proficient catalysts for hydrogenation of CO2 to methanol. In situ X-ray absorption spectroscopy (XAS), in conjunction with gas-switching experiments, is used to amplify subtle changes occurring at the surface of this tailored catalyst during reaction. Consequently, an Au-Zn alloy is identified and is shown to undergo subsequent reversible redox changes under reaction conditions according to multivariate curve resolution alternating least-squares (MCR-ALS) analysis. These results highlight the role of alloying and dealloying in Au-based CO2 hydrogenation catalysts and illustrate the role of these reversible processes in driving reactivity.

Active Site Descriptors from 95Mo NMR Signatures of Silica-Supported Mo-Based Olefin Metathesis Catalysts.

The olefin metathesis activity of silica-supported molybdenum oxides depends strongly on metal loading and preparation conditions, indicating that the nature and/or amounts of the active sites vary across compositionally similar catalysts. This is illustrated by comparing Mo-based (pre)catalysts prepared by impregnation (2.5-15.6 wt % Mo) and a model material (2.3 wt % Mo) synthesized via surface organometallic chemistry (SOMC). Analyses of FTIR, UV-vis, and Mo K-edge X-ray absorption spectra show that these (pre)catalysts are composed predominantly of similar isolated Mo dioxo sites. However, they exhibit different reaction properties in both liquid and gas-phase olefin metathesis with the SOMC-derived catalyst outperforming a classical catalyst of a similar Mo loading by ×1.5-2.0. Notably, solid-state 95Mo NMR analyses leveraging state-of-the-art high-field (28.2 T) measurement conditions resolve four distinct surface Mo dioxo sites with distributions that depend on the (pre)catalyst preparation methods. The intensity of a specific deshielded 95Mo NMR signal, which is most prominent in the SOMC-derived catalyst, is linked to reducibility and catalytic activity. First-principles calculations show that 95Mo NMR parameters directly manifest the local strain and coordination environment: acute (SiO-Mo(O)2-OSi) angles and low coordination numbers at Mo lead to highly deshielded 95Mo chemical shifts and small quadrupolar coupling constants, respectively. Natural chemical shift analyses relate the 95Mo NMR signature of strained species to low LUMO energies, which is consistent with their high reducibility and corresponding reactivity. The 95Mo chemical shifts of supported Mo dioxo sites are thus linked to their specific electronic structures, providing a powerful descriptor for their propensity toward reduction and formation of active sites.

Origin of the Activity Trend in the Oxidative Dehydrogenation of Ethanol over VOx /CeO2.

Supported vanadia (VOx ) is a versatile catalyst for various redox processes where ceria-supported VOx have shown to be particularly active in the oxidative dehydrogenation (ODH) of alcohols. In this work, we clarify the origin of the volcano-shaped ethanol ODH activity trend for VOx /CeOx catalysts using operando quick V K- and Ce L3 - edge XAS experiments performed under transient conditions. We quantitatively demonstrate that both vanadium and cerium are synergistically involved in alcohol ODH. The concentration of reversible Ce4+ /Ce3+ species was identified as the main descriptor of the alcohol ODH activity. The activity drop in the volcano plot, observed at above ca. 3 V nm-2 surface loading (ca. 30 % of VOx monolayer coverage), is related to the formation of spectator V4+ and Ce3+ species, which were identified here for the first time. These results might prove to be helpful for the rational optimization of VOx /CeO2 catalysts and the refinement of the theoretical models.

Reaction-Induced Formation of Stable Mononuclear Cu(I)Cl Species on Carbon for Low-Footprint Vinyl Chloride Production.

Copper catalysts are attractive candidates for Hg-free vinyl chloride monomer (VCM) production via acetylene hydrochlorination due to their non-toxic nature and high stability. However, the optimal architecture for Cu-based catalysts at the nanoscale is not yet fully understood. To address this gap, the metal precursor and the annealing temperature are modified to prepare copper nanoparticles or single atoms, either in chlorinated or ligand-free form, on an unmodified carbon support. Evaluation in the reaction reveals a remarkable convergence of the performance of all materials to the stable VCM productivity of the single-atom catalyst. In-depth characterization by advanced microscopy, quasi in situ and operando spectroscopy, and simulations uncover a reaction-induced formation of low-valent, single atom Cu(I)Cl site motif, regardless of the initial nanostructure. Various surface oxygen groups promote nanoparticle redispersion by stabilizing single-atom CuClx species. The anchoring site structure does not strongly influence the acetylene adsorption energy or the crucial role they play in stabilizing key reaction intermediates. A life-cycle assessment demonstrates the potential environmental benefits of copper catalysts over state-of-the-art alternatives. This work contributes to a better understanding of optimal metal speciation and highlights the sustainability of Cu-based catalysts for VCM production.

Direct Photocatalytic Synthesis of Acetic Acid from Methane and CO at Ambient Temperature Using Water as Oxidant.

Direct functionalization of methane selectively to value-added chemicals is still one of the main challenges in modern science. Acetic acid is an important industrial chemical produced nowadays by expensive and environmentally unfriendly carbonylation of methanol using homogeneous catalysts. Here, we report a new photocatalytic reaction route to synthesize acetic acid from CH4 and CO at room temperature using water as the sole external oxygen source. The optimized photocatalyst consists of a TiO2 support and ammonium phosphotungstic polyoxometalate (NPW) clusters anchored with isolated Pt single atoms (Pt1). It enables a stable synthesis of 5.7 mmol·L-1 acetic acid solution in 60 h with the selectivity over 90% and 66% to acetic acid on liquid-phase and carbon basis, respectively, with the production of 99 mol of acetic acid per mol of Pt. Combined isotopic and in situ spectroscopy investigation suggests that synthesis of acetic acid proceeds via a photocatalytic oxidative carbonylation of methane over the Pt1 sites, with the methane activation facilitated by water-derived hydroxyl radicals.

Platinum-Iron(II) Oxide Sites Directly Responsible for Preferential Carbon Monoxide Oxidation at Ambient Temperature: An Operando X-ray Absorption Spectroscopy Study.

Operando X-ray absorption spectroscopy identified that the concentration of Fe2+ species in the working state-of-the-art Pt-FeOx catalysts quantitatively correlates to their preferential carbon monoxide oxidation steady-state reaction rate at ambient temperature. Deactivation of such catalysts with time on stream originates from irreversible oxidation of active Fe2+ sites. The active Fe2+ species are presumably Fe+2 O-2 clusters in contact with platinum nanoparticles; they coexist with spectator trivalent oxidic iron (Fe3+ ) and metallic iron (Fe0 ) partially alloyed with platinum. The concentration of active sites and, therefore, the catalyst activity strongly depends on the pretreatment conditions. Fe2+ is the resting state of the active sites in the preferential carbon monoxide oxidation cycle.

BCC-Cu nanoparticles: from a transient to a stable allotrope by tuning size and reaction conditions.

Metallic copper generally adopts an FCC structure. In this work, we detect highly unusual BCC-structured Cu nanoparticles as a transient intermediate during the H2 reduction of a CuI precursor, [Cu4OtBu4], grafted onto the surface of partially dehydroxylated silica. The Cu BCC structure, assigned by in situ Cu K-edge XANES and EXAFS, as well as in situ synchrotron PXRD, converts upon heating into the most commonly found FCC allotrope. DFT calculations show that the BCC-Cu phase is in fact predicted to be more stable for small particles, and that their stability increases at lower H2 concentrations. Using this knowledge, we show that it is possible to synthesize BCC-structured Cu nanoparticles as a stable allotrope by reduction of the same grafted precursor either in 10% H2 diluted in Ar or 100% H2 at low temperature.

Beware of beam damage under reaction conditions: X-ray induced photochemical reduction of supported VOx catalysts during in situ XAS experiments.

In situ X-ray absorption spectroscopy (XAS) is a powerful technique for the investigation of heterogeneous catalysts and electrocatalysts. The obtained XAS spectra are usually interpreted from the point of view of the investigated chemical processes, thereby sometimes omitting the fact that intense X-ray irradiation may induce additional transformations in metal speciation and, thus, in the corresponding XAS spectra. In this work, we report on X-ray induced photochemical reduction of vanadium in supported vanadia (VOx) catalysts under reaction conditions, detected at a synchrotron beamline. While this process was not observed in an inert atmosphere and in the presence of water vapor, it occurred at room temperature in the presence of a reducing agent (ethanol or hydrogen) alone or mixed with oxygen. Temperature programmed experiments have shown that X-ray induced reduction of VOx species appeared very clear at 30-100 °C but was not detected at higher temperatures, where the thermocatalytic ethanol oxidative hydrogenation (ODH) takes place. Similar to other studies on X-ray induced effects, we suggest approaches, which can help to mitigate vanadium photoreduction, including defocusing of the X-ray beam and attenuation of the X-ray beam intensity by filters. To recognize beam damage under in situ/operando conditions, we suggest performing X-ray beam switching (on and off) tests at different beam intensities under in situ conditions.

Flame-made ternary Pd-In2O3-ZrO2 catalyst with enhanced oxygen vacancy generation for CO2 hydrogenation to methanol.

Palladium promotion and deposition on monoclinic zirconia are effective strategies to boost the performance of bulk In2O3 in CO2-to-methanol and could unlock superior reactivity if well integrated into a single catalytic system. However, harnessing synergic effects of the individual components is crucial and very challenging as it requires precise control over their assembly. Herein, we present ternary Pd-In2O3-ZrO2 catalysts prepared by flame spray pyrolysis (FSP) with remarkable methanol productivity and improved metal utilization, surpassing their binary counterparts. Unlike established impregnation and co-precipitation methods, FSP produces materials combining low-nuclearity palladium species associated with In2O3 monolayers highly dispersed on the ZrO2 carrier, whose surface partially transforms from a tetragonal into a monoclinic-like structure upon reaction. A pioneering protocol developed to quantify oxygen vacancies using in situ electron paramagnetic resonance spectroscopy reveals their enhanced generation because of this unique catalyst architecture, thereby rationalizing its high and sustained methanol productivity.

Correction to "Silica-Supported PdGa Nanoparticles: Metal Synergy for Highly Active and Selective CO2-to-CH3OH Hydrogenation".

[This corrects the article DOI: 10.1021/jacsau.1c00021.].

Elucidation of Metal Local Environments in Single-Atom Catalysts Based on Carbon Nitrides.

The ability to tailor the properties of metal centers in single-atom heterogeneous catalysts depends on the availability of advanced approaches for characterization of their structure. Except for specific host materials with well-defined metal adsorption sites, determining the local atomic environment remains a crucial challenge, often relying heavily on simulations. This article reports an advanced analysis of platinum atoms stabilized on poly(triazine imide), a nanocrystalline form of carbon nitride. The approach discriminates the distribution of surface coordination sites in the host, the evolution of metal coordination at different stages during the synthesis of the material, and the potential locations of metal atoms within the lattice. Consistent with density functional theory predictions, simultaneous high-resolution imaging in high-angle annular dark field and bright field modes experimentally confirms the preferred localization of platinum in-plane in the corners of the triangular cavities. X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and dynamic nuclear polarization enhanced 15 N nuclear magnetic resonance (DNP-NMR) spectroscopies coupled with density functional theory (DFT) simulations reveal that the predominant metal species comprise Pt(II) bound to three nitrogen atoms and one chlorine atom inside the coordination sites. The findings, which narrow the gap between experimental and theoretical elucidation, contribute to the improved structural understanding and provide a benchmark for exploring the speciation of single-atom catalysts based on carbon nitrides.

Redox Dynamics of Active VO x Sites Promoted by TiO x during Oxidative Dehydrogenation of Ethanol Detected by Operando Quick XAS.

Titania-supported vanadia (VO x /TiO2) catalysts exhibit outstanding catalytic in a number of selective oxidation and reduction processes. In spite of numerous investigations, the nature of redox transformations of vanadium and titanium involved in various catalytic processes remains difficult to detect and correlate to the rate of products formation. In this work, we studied the redox dynamics of active sites in a bilayered 5% V2O5/15% TiO2/SiO2 catalyst (consisting of submonolayer VO x species anchored onto a TiO x monolayer, which in turn is supported on SiO2) during the oxidative dehydrogenation of ethanol. The VO x species in 5% V2O5/15% TiO2/SiO2 show high selectivity to acetaldehyde and an ca. 40 times higher acetaldehyde formation rate in comparison to VO x species supported on SiO2 with a similar density. Operando time-resolved V and Ti K-edge X-ray absorption near-edge spectroscopy, coupled with a transient experimental strategy, quantitatively showed that the formation of acetaldehyde over 5% V2O5/15% TiO2/SiO2 is kinetically coupled to the formation of a V4+ intermediate, while the formation of V3+ is delayed and 10-70 times slower. The low-coordinated nature of various redox states of VO x species (V5+, V4+, and V3+) in the 5% V2O5/15% TiO2/SiO2 catalyst is confirmed using the extensive database of V K-edge XANES spectra of standards and specially synthesized molecular crystals. Much weaker redox activity of the Ti4+/Ti3+ couple was also detected; however, it was found to not be kinetically coupled to the rate-determining step of ethanol oxidation. Thus, the promoter effect of TiO x is rather complex. TiO x species might be involved in a fast electron transport between VO x species and might affect the electronic structure of VO x , thereby promoting their reducibility. This study demonstrates the high potential of element-specific operando X-ray absorption spectroscopy for uncovering complex catalytic mechanisms involving the redox kinetics of various metal oxides.

Silica-Supported PdGa Nanoparticles: Metal Synergy for Highly Active and Selective CO2-to-CH3OH Hydrogenation.

The direct conversion of CO2 to CH3OH represents an appealing strategy for the mitigation of anthropogenic CO2 emissions. Here, we report that small, narrowly distributed alloyed PdGa nanoparticles, prepared via surface organometallic chemistry from silica-supported GaIII isolated sites, selectively catalyze the hydrogenation of CO2 to CH3OH. At 230 °C and 25 bar, high activity (22.3 molMeOH molPd -1 h-1) and selectivity for CH3OH/DME (81%) are observed, while the corresponding silica-supported Pd nanoparticles show low activity and selectivity. X-ray absorption spectroscopy (XAS), IR, NMR, and scanning transmission electron microscopy-energy-dispersive X-ray provide evidence for alloying in the as-synthesized material. In situ XAS reveals that there is a dynamic dealloying/realloying process, through Ga redox, while operando diffuse reflectance infrared Fourier transform spectroscopy demonstrates that, while both methoxy and formate species are observed in reaction conditions, the relative concentrations are inversely proportional, as the chemical potential of the gas phase is modulated. High CH3OH selectivities, across a broad range of conversions, are observed, showing that CO formation is suppressed for this catalyst, in contrast to reported Pd catalysts.

Deciphering the Phillips Catalyst by Orbital Analysis and Supervised Machine Learning from Cr Pre-edge XANES of Molecular Libraries.

Unveiling the nature and the distribution of surface sites in heterogeneous catalysts, and for the Phillips catalyst (CrO3/SiO2) in particular, is still a grand challenge despite more than 60 years of research. Commonly used references in Cr K-edge XANES spectral analysis rely on bulk materials (Cr-foil, Cr2O3) or molecules (CrCl3) that significantly differ from actual surface sites. In this work, we built a library of Cr K-edge XANES spectra for a series of tailored molecular Cr complexes, varying in oxidation state, local coordination environment, and ligand strength. Quantitative analysis of the pre-edge region revealed the origin of the pre-edge shape and intensity distribution. In particular, the characteristic pre-edge splitting observed for Cr(III) and Cr(IV) molecular complexes is directly related to the electronic exchange interactions in the frontier orbitals (spin-up and -down transitions). The series of experimental references was extended by theoretical spectra for potential active site structures and used for training the Extra Trees machine learning algorithm. The most informative features of the spectra (descriptors) were selected for the prediction of Cr oxidation states, mean interatomic distances in the first coordination sphere, and type of ligands. This set of descriptors was applied to uncover the site distribution in the Phillips catalyst at three different stages of the process. The freshly calcined catalyst consists of mainly Cr(VI) sites. The CO-exposed catalyst contains mainly Cr(II) silicates with a minor fraction of Cr(III) sites. The Phillips catalyst exposed to ethylene contains mainly highly coordinated Cr(III) silicates along with unreduced Cr(VI) sites.

Lignin Compounds to Monoaromatics: Selective Cleavage of C-O Bonds over a Brominated Ruthenium Catalyst.

The cleavage of C-O linkages in aryl ethers in biomass-derived lignin compounds without hydrogenation of the aromatic rings is a major challenge for the production of sustainable mono-aromatics. Conventional strategies over the heterogeneous metal catalysts require the addition of homogeneous base additives causing environmental problems. Herein, we propose a heterogeneous Ru/C catalyst modified by Br atoms for the selective direct cleavage of C-O bonds in diphenyl ether without hydrogenation of aromatic rings reaching the yield of benzene and phenol as high as 90.3 % and increased selectivity to mono-aromatics (97.3 vs. 46.2 % for initial Ru) during depolymerization of lignin. Characterization of the catalyst indicates selective poisoning by Br of terrace sites over Ru nanoparticles, which are active in the hydrogenation of aromatic rings, while the defect sites on the edges and corners remain available and provide higher intrinsic activity in the C-O bond cleavage.